Xantrex XPower 2A Charger 804-0020The Xantrex Xpower Battery charger is a Rapid Charge™ Technology delivers up to three times faster charging than traditional chargers. Micro-processor controlled charging for longer battery life.Three-stage Charging Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: - Bulk: Replaces 70-80% of the battery's state of charge at the fastest possible rate.
- Absorption: Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.
- Float: Voltage is reduced and held constant in order to prevent damage and keep batteries at a full charge.
| Xantrex XPower 2A Charger 804-0020 | $29.99 | - Ideal for recharging ATV, snowmobile, motorcycle, personal watercraft and lawn tractor batteries
- Maintains batteries over long storage periods and during cold weather
- 2 amp constant DC output current
- Two-step charging
- Easy battery connection through three types of connectors provided with the unit: clip leads
- DC lighter plug and ring terminals "Plug and play" charging solution
- requires no installation or setup
- Wide voltage range operation (90-132 VAC, 50/60Hz)
- Small footprint and lightweight
- Comes with detachable mounting feet
|  Hover to Enlarge | |
|
| Electrical Specifications | | | Output current | 2A | Output voltage (nominal, depending on settings): | - Charge | 14.4 VDC | - Float | 13.0 VDC | - Equalize | N/A | AC input voltage | 115 VAC, 50/60 Hz | Charger efficiency | 80% approx. | Recommended battery type | Sealed, AGM, lead acid | Recommended battery size | 6-50 Ah | Charging Type | 2 stage | | | | General Specifications | | | Operating temperature | 0° C to 40° C | Storage temperature | -25° C to 70° C | Part number | 804-0020 | Warranty | 12 months | | | | Regulatory Approvals | | | ETL approved to CSA 107.2, UL 1236 |
Note: Specifications subject to change without notice. |